Build a Valorant crosshair here, see it at its real in-game size, and copy the code straight into the game. Every slider matches the game’s own Crosshair menu, in the same order and with the same limits. You can also paste any crosshair code to load and tweak it.
How to Use the Crosshair Maker
- Start from the default or paste a code you already like into the box under the preview and press Load.
- Change settings on the right. Sections and names match the game, so Primary → Inner Lines here is the same tab in Valorant.
- Watch the preview. It is drawn one screen pixel per game pixel at 1080p on the same wall texture the game uses behind its crosshair preview, with a 6× close-up in the corner.
- Press Copy, then in game go to Settings → Crosshair → Primary → Import Profile Code and paste it.
How to Import a Crosshair Code in Valorant
Valorant saves crosshairs as profiles, and each profile can be shared as a code. The import button sits in Settings → Crosshair → Primary, next to your crosshair profile:
- 1
Open Settings and pick the Crosshair tab.
- 2
Choose Primary at the top.
- 3
Next to Crosshair Profile, click the Import Profile Code button (the down arrow).

- 4
Paste the code into the Import Profile box and press Import. It is saved as a new profile, so your current crosshair stays as it was.

To share your own, use the export icon beside the profile and the game copies its code for you.
Every Crosshair Setting, Default and Range
These are the game’s own defaults and slider limits for the Primary crosshair on PC, taken from the Valorant game files.
| Setting | Default | Range |
|---|---|---|
| Primary: Crosshair | ||
| Crosshair Color | White | 8 presets or Custom |
| Outline Opacity | 0.5 | 0 to 1 |
| Outline Thickness | 1 | 1 to 6 |
| Center Dot Opacity | 1 | 0 to 1 |
| Center Dot Thickness | 2 | 1 to 6 |
| Primary: Inner Lines | ||
| Inner Line Opacity | 0.8 | 0 to 1 |
| Horizontal / Vertical Line Length | 6 | 0 to 20 |
| Inner Line Thickness | 2 | 0 to 10 |
| Inner Line Offset | 3 | 0 to 20 |
| Primary: Outer Lines | ||
| Outer Line Opacity | 0.35 | 0 to 1 |
| Horizontal / Vertical Line Length | 2 | 0 to 10 |
| Outer Line Thickness | 2 | 0 to 10 |
| Outer Line Offset | 10 | 0 to 40 |
| Sniper: Crosshair | ||
| Center Dot Color | Red | 8 presets or Custom |
| Center Dot Opacity | 0.75 | 0 to 1 |
| Center Dot Thickness | 1 | 0 to 4 |
Allow Vertical Scaling splits the line length in two, so the vertical lines can be a different length from the horizontal ones. With it off, one Horizontal / Vertical Line Length sets both.
What Each Crosshair Option Does
- Opacity sets how see-through each part is, from 0 (invisible) to 1 (solid). Lower opacity on the outer lines keeps them from covering targets.
- Line Length is how long each arm is in pixels, and Thickness is how wide. Inner lines can be up to 20 long, outer lines up to 10.
- Offset is the gap between the center and where each line starts. Inner lines go up to 20, outer lines up to 40.
- Outlines draws a black border around every part. Outline Thickness runs from 1 to 6, which helps on bright backgrounds.
- Movement Error and Firing Error make the lines spread out while you move or shoot, with multipliers from 0 to 3. The pros on our hub switch Firing Error off so the crosshair never changes shape.
- Fade Crosshair With Firing Error, in the General tab, fades the crosshair while you spray. Override Firing Error Offset With Crosshair Offset keeps the gap you set instead of the weapon’s spread.
Why Console Crosshairs Look Bigger
The console version ships with a heavier default crosshair. The game files give it longer lines, bigger gaps and much stronger outer lines than PC:
| Setting | PC default | Console default |
|---|---|---|
| Outline Opacity | 0.5 | 0.8 |
| Inner Line Opacity | 0.8 | 1 |
| Inner Line Length | 6 | 8 |
| Inner Line Offset | 3 | 4 |
| Outer Line Opacity | 0.35 | 0.8 |
| Outer Line Length | 2 | 4 |
| Outer Line Offset | 10 | 13 |
Tips for a Cleaner Crosshair
- Turn Outer Lines off. Almost every pro does, and it stops the crosshair cluttering the area around your target.
- Pick a color that stands out against the maps you play most. Cyan, green and yellow are the usual choices, and white blends into bright walls.
- Keep Inner Line Offset small, around 0 to 3, so the gap points at exactly where your shot lands.
- If you lose the crosshair on bright walls, turn Outlines on with an opacity around 0.5.
Start From a Pro’s Crosshair
Want a proven starting point? Load a pro’s crosshair into the maker with one click and change it from there, or read their full setup on their page.











TooleDPI Calculator
ProTenZ Settings
ProOXY Settings