Lethamyr plays on 110 FOV, 270 Distance, 110 Height, -4 Angle, 0.55 Stiffness, 5.00 Swivel Speed and 1.50 Transition Speed, with Camera Shake off and Demo Transition Time at 0. These are the values in his game in March 2026. Click through the tabs below to see his camera, interface and video settings as they look in game.
Lethamyr Camera settings
Lethamyr Bindings settings
Lethamyr Interface settings
Lethamyr Video settings
His camera is higher and stiffer than most players use. The 110 height and 0.55 stiffness are the two values that make it feel different, so set those first if you want to try it. Here is the whole camera in one table:
| Setting | Lethamyr (2026) |
|---|---|
| Field of View | 110 |
| Distance | 270 |
| Height | 110 |
| Angle | -4.0 |
| Stiffness | 0.55 |
| Swivel Speed | 5.00 |
| Transition Speed | 1.50 |
| Camera Shake | Off |
| Demo Transition Time | 0.00 |
| Invert Swivel | Off |
| Controller | Thrustmaster eSwap HEART |
His current sensitivity and deadzone are not public, so this guide covers the camera, interface, video settings and binds he has shown himself. Rows in the interactive window that were not on screen, like the two Preview Spawn timers, show the game default.
Who is Lethamyr?

- Real name
- Treyven Robitaille
- Region
- North America (Canada)
- Input
- Controller (Thrustmaster eSwap HEART)
- Best RLCS result
- 2nd, RLCS Season 4 North America (Ghost Gaming)
- Teams
- Denial Esports, Ghost Gaming; coach of mousesports
- Now
- Content creator and custom map maker (Spacestation Gaming)
Treyven Robitaille, known as Lethamyr, is a Canadian Rocket League content creator and custom map maker. He was a pro first: he reached the RLCS Season 3 finals with Denial Esports, then joined Ghost Gaming, finished 2nd in RLCS Season 4 North America in 2017 and played the Season 4 finals. He later coached mousesports in the European RLCS before moving to content full time.
He has been a content creator for Spacestation Gaming since 2021. His videos are mostly custom maps and challenge modes, and he builds and shares maps for the Steam and Epic versions of the game on his website. He posts on his YouTube channel and streams on Twitch. His name comes from a Minecraft map.
Lethamyr’s camera settings

Lethamyr sits at the high, stiff end of the pro range. His 110 height is the tallest in our pro guides, shared only with Dark, and his 0.55 stiffness is above every one of them. Here is how his camera compares with the game’s default camera and the values across our other guides:
Lethamyr vs the game default vs other pros
| Lethamyr | Game default | Range in our pro guides | |
|---|---|---|---|
| Field of View | 110 | 90 | 109 to 110 |
| Distance | 270 | 270 | 270 to 290 |
| Height | 110 | 100 | 90 to 110 |
| Angle | -4 | -3 | -5 to -3 |
| Stiffness | 0.55 | 0.50 | 0.35 to 0.45 |
| Swivel Speed | 5.00 | 2.50 | 4.00 to 7.00 |
| Transition Speed | 1.50 | 1.00 | 1.20 to 1.80 |
The ranges come from SquishyMuffinz, Zen, Musty, BeastMode and Dark. Stiffness is the one value outside that range: Lethamyr is the only one above the game’s default of 0.50, while the others sit between 0.35 and 0.45.
The game’s own tip: raising Camera Stiffness reduces how far the camera zooms out when you hit supersonic. That is why his 0.55 keeps the car closer on screen at full speed than the 0.35 to 0.45 most pros use.
Field of View, Distance, Height and Angle
110 FOV and 270 distance are the same as almost every pro. The difference is the 110 height, which lifts the camera above the car and shows more of the field around the ball. Dark also plays on 110 height, while Zen uses 100 and SquishyMuffinz 90.
His -4 angle points the camera one step further down than the default -3, so the higher camera still looks down on the car. BeastMode makes the same kind of pairing lower down, with 90 height and -4.
Stiffness, Swivel Speed and Transition Speed
Stiffness is 0.55, and it has come down a long way. In 2018 he ran 1.00, the maximum. His reason at the time was accuracy: with the camera distance fixed, it was easier to judge when he could hit the ball with full power. By February 2025 he was on 0.55, which still keeps the camera closer behind the car at supersonic speed than the 0.35 to 0.45 most pros use.
Swivel Speed is 5.00, the same as Dark. Transition Speed is 1.50, the first setting he had changed in about three years when he moved up from 1.00 in May 2025. He said people on his stream kept telling him to try it again, and that 1.50 was fast enough to look back at the play quickly without feeling jarring once he got used to it.
Lethamyr’s interface settings
Lethamyr keeps Interface and Display Scale at 100% and Nameplate Scale at 200%, the maximum, so other players’ names are as large as the game allows. He also leaves every indicator on:
| Setting | Value |
|---|---|
| Interface Scale | 100% |
| Display Scale | 100% |
| Nameplate Scale | 200% (max) |
| Team-Colored Boost Meter | Off |
| Metric | On |
| Ball Cam Indicator | On |
| Ball Arrow | On |
Ball Cam Indicator and Ball Arrow are both on, so the screen shows which camera he is using and points toward the ball when it is off screen. SquishyMuffinz runs the same max nameplates and Ball Arrow but turns the Ball Cam Indicator off. Metric is on as well, so the game uses metric units.
Lethamyr’s video settings

Set Resolution to your own monitor’s native resolution. Lethamyr plays at 2560 x 1440 in Borderless mode, with V-Sync and anti-aliasing off. His frame rate is the option the game marks as Recommended, which showed as 359 FPS on his setup.
| Setting | Value |
|---|---|
| Resolution | Your monitor’s native (Lethamyr: 2560 x 1440) |
| Display Mode | Borderless |
| Vertical Sync | Off |
| Anti-Aliasing | Off |
| Render Quality | High Quality |
| Render Detail | Custom |
| Frames Per Second | Recommended (359 on his setup) |
| Texture Detail | High Performance |
| World / Particle Detail | Performance |
| Effect Intensity | Default |
| Every other effect | Off |
Every detail setting is on its performance option and every effect is off, from shaders and bloom to dynamic shadows and weather. Render Quality stays on High Quality. While switching between low and high settings in March 2026, he noted that the new boost pad recharge visual is hard to read from far away on either one, so you still have to time big boosts yourself.
In March 2026 Lethamyr found his Input Buffer (Gameplay tab) had been on CSTS for a long time, which he blamed for the game feeling laggy. He doesn’t recommend CSTS unless you have bad latency, so check what yours is set to.
Lethamyr’s controller bindings
Lethamyr plays on an Xbox-layout controller (a Thrustmaster eSwap), and his binds are about as simple as they get:
Lethamyr controller binds (Xbox)
| Action | Keys |
|---|---|
| Drive Forward | RT |
| Drive Backwards | LT |
| Steer | Left Stick |
| Jump | A |
| Boost | B |
| Powerslide | LB |
| Air Roll | LB |
| Focus on Ball | Y |
| Rear View | RS |
The only change from default is Powerslide and Air Roll together on LB. Jump, Boost and ball cam stay on A, B and Y. His stream commands have listed this layout for years, and it is one of the most common pro setups because it frees the face buttons for jump and boost.
How Lethamyr’s settings have changed
In 2018 Lethamyr called his camera the most unique in the RLCS, mostly because of his stiffness. The two big changes are a much lower stiffness and a faster transition speed:
Lethamyr camera history
- 2018
1.00 stiffness
Runs the maximum stiffness so the camera distance never changes, for more accurate hits.
- February 2025
0.55 stiffness
110 FOV, 270 distance, 110 height, -4 angle and 0.55 stiffness.
- May 2025
Transition Speed 1.00 to 1.50
His first settings change in about three years, after viewers kept asking him to try a faster transition.
- March 2026
Same camera, CSTS switched off
Camera unchanged at 110 / 270 / 110 / -4 / 0.55 / 5.00 / 1.50. He finds his Input Buffer had been on CSTS and says he doesn’t recommend it.
If you copied his camera from an older video, check Stiffness and Transition Speed first. Those are the two values that have changed.
How his settings compare to other pros
Dark is the closest match: both play on 110 FOV and 110 height with a 5.00 swivel. Lethamyr uses a shorter 270 distance, a steeper -4 angle and a stiffer 0.55 camera, against Dark’s 290 distance, -3 angle and 0.40 stiffness.
Most current pros go the other way. Zen plays 100 height and 0.35 stiffness, and SquishyMuffinz and BeastMode play on 90 height. For more setups, see our guides to Arsenal, Musty and RW9, or our roundups of the best camera settings and best controller settings.
How to copy Lethamyr’s settings
Work through the tabs in this order and you’ll have his setup in a few minutes. Tick each step off as you go.
Copy Lethamyr’s setup in four steps
0/4Camera
Open Settings, Camera. Turn Camera Shake off, then set FOV 110, Distance 270, Height 110, Angle -4, Stiffness 0.55, Swivel Speed 5.00, Transition Speed 1.50 and Demo Transition Time 0.
Interface
Interface and Display Scale 100%, Nameplate Scale 200%, and turn Ball Cam Indicator and Ball Arrow on.
Video
Your native resolution, Borderless, V-Sync and anti-aliasing off, Render Quality High Quality, FPS on the Recommended option, details on performance and every effect off.
Gameplay
Check that Input Buffer is not on CSTS unless your connection needs it.
Lethamyr settings FAQ
What are Lethamyr’s camera settings?
In March 2026 he played on 110 FOV, 270 distance, 110 height, -4 angle, 0.55 stiffness, 5.00 swivel speed and 1.50 transition speed, with Camera Shake off and Demo Transition Time at 0.
Why is Lethamyr’s camera height so high?
A 110 height shows more of the field around the ball. He pairs it with a -4 angle so the camera still looks down toward the car.
What stiffness does Lethamyr use?
He is on 0.55 now. He used to run 1.00, the maximum, because a camera that never zooms out made it easier for him to judge full-power hits.
What transition speed does Lethamyr use?
1.50 since May 2025. He had used 1.00 for years and moved up after viewers kept asking him to try a faster setting.
Is Lethamyr a pro player?
He played in the RLCS for Denial Esports and Ghost Gaming and coached mousesports, but he retired from pro play to make content. He is now a content creator and custom map maker with Spacestation Gaming.
What controller does Lethamyr use?
His stream lists a Thrustmaster eSwap HEART controller. His current deadzone and sensitivity are not public.





































Pro SettingsZen
Settings & GuidesBest Controller Settings
Pro SettingsSquishyMuffinz